- Patented D2430K 3-inch (75mm) Dual Diaphragm, Dual Motor Compression Driver
- Patented High-Definition Imaging Horn Geometry
- Dual 12-inch (300mm) Cast-frame, Carbon Cellulose Composite Cone (C4) Woofers
- Heavily-braced, 1-inch (25mm) thick MDF Enclosure with Sonoglass® Horn
- Advanced Multi-capacitor Crossover Network with Front-panel Configurable Settings
- Dual Gold-plated Binding Post Input Terminals
- Steel frame, Magnetically-attached Black Cloth Grille
ups.changezipcode ups.edit
Этот товар в данный момент недоступен.
Patented D2430K 3-inch (75mm) Dual Diaphragm, Dual Motor Compression Driver
Patented High-Definition Imaging Horn Geometry
Dual 12-inch (300mm) Cast-frame, Carbon Cellulose Composite Cone (C4) Woofers
Функции
Heavily-braced, 1-inch (25mm) thick MDF Enclosure with Sonoglass® Horn
Advanced Multi-capacitor Crossover Network with Front-panel Configurable Settings
Dual Gold-plated Binding Post Input Terminals
Steel frame, Magnetically-attached Black Cloth Grille
Технические характеристики и скачанные файлы
Item# JBLSCL1BLK
SCL-1
The SCL-1 is a custom in-room/built-in loudspeaker and is the flagship of the JBL Synthesis SCL loudspeaker range. It features JBL's patented D2430K dual 3-inch (75mm) compression driver mated to a large format High-Definition Imaging (HDI™) horn. Dual 12-inch (300mm) Carbon Cellulose Composite Cone (C4) cast-frame woofers operate in a patented Complementary Bass Alignment System (CBAS™) enclosure to provide high-output capability while delivering an easy load to the amplifier. A front-panel configuration panel allows for bi-wiring, bi-amplification, and crossover bypass for fully active operation with outboard digital crossovers. The SSW-1 delivers unparalleled performance behind projection screens and inside custom cabinetry and is ideal for use in large to extra-large rooms.
Общее
- Type
- 2-Way In-room loudspeaker
- Low Frequency Drivers
- Dual 12-inch (300mm) Black Carbon Cellulose Composite Cone (C4) cast-frame woofers
- High Frequency Driver
- 3" (75mm) dual annular Teonex ring-diaphragm compression driver with dual neodymium motor structures mated to Sonoglass HDI horn
- Recommended Amplifier Power (Full bandwidth)
- 500 WRMS
- Recommended Amplifier Power (80 Hz HPF)
- 500 WRMS
- Impedance
- 4 Ohm
- Loudspeaker Sensitivity
- 94 dB/1W/1m
- Frequency Response
- 40 Hz - 24 kHz (-6 dB), 3rd order LF roll-off
- Crossover Frequency
- 775 Hz
- Coverage area, -6 dB @ 10 kHz
- Approximately 120 degrees horizontal x 100 degrees vertical
- Coverage area, -6 dB @ 20 kHz
- Approximately 90 degrees horizontal x 70 degrees vertical
- Enclosure Type
- Complementary Bass Alignment System (CBAS™)
- HF Level Controls
- 3 Position - No grille, With grille, or With screen
- Grille Dimensions
- 47.98" H x 19" W x 0.787" D (1218.7mm x 482.6mm x 20mm)
- Product Dimensions
- 47.98" H x 19" W x 14.49" D (1218.7mm x 482.6mm x 368.1mm)
- Input Type
- Dual sets of gold-plated binding posts
- Product Weight
- 177.5 lb. (80.5kg)
- Shipping Weight
- 306.5 lb. (139 kg)
- Shipping Units of Measure
- Each
- Warranty
- 5 Years
Поддержка
Зарегистрируйте ваш продукт JBL
Вы являетесь владельцем этого продукта? Зарегистрируйте его здесь на случай, если вам потребуется воспользоваться гарантией
ЗарегистрироватьНе нашли то, что искали?
Вам нужна поддержка продуктов, документация, практические советы или более старые версии продуктов?
Поддержка JBL